FEATURES The DB-1020MPT contain nine different industrial PLC where any two PLC don't have the same brand. DB-1020MPT used seventeen (17) different input/output  module for interfacing Nine (9) different PLC. Students can program, interface with input and output load from nine different industrial PLC. So the student will be familiar with most of the PLC applications and be capable of controlling any PLC operated machinery from Industries.   SPECIFICATIONS LIST OF APPLICATION/EXPERIMENT WITH DIFFERENT MODULES 1. The constriction of nine different categories PLC. 2. Interfacing method of nine different categories PLC. 3. Programming method of nine different categories PLC. 4. Pick & Place using PLC & Pneumatic Air Suction method. 5. Pick & Place using PLC & Pneumatic Gripper method. 6. Water Pump Control using nine different categories PLC. 7. Fire Indication System using nine different categories PLC. 8. Traffic Light Control using nine different categories PLC. 9. The constriction of Pneumatic cylinder. 10. Sequential control of three Pneumatic cylinder using nine different categories PLC. 11. The constriction of Pneumatic solenoid valve. 12. Control of Pneumatic solenoid valve using PLC. 13. Interfacing of PLC & Pneumatic solenoid valve. 14. The method of Control Relay using PLC. 15. The methods of three phase Induction Motor Starter using PLC. 16. Forward-and-reverse operation methods of three phase Induction Motor. 17. The method of interfacing PLC with Input Switch. 18. The method of interfacing PLC with Input Sensor. 19. Operating method of interfacing proximity sensor with PLC. 20. Operating method of interfacing photo sensor with PLC. 21. Use of Variable Frequency Drive with PLC. 22. Programming method of Variable Frequency Drive with PLC. 23. The construction of Three Phase Induction motor. 24. Interfacing Method of Three Phase Induction motor with VFD & PLC. 25. The construction of Stepper Motor. 26. Interfacing Method of Stepper Motor with PLC. 27. The construction of Seven Segment Display. TECHNICAL SPECIFICATION Main Voltage: 1 Phase 220V / 50/60Hz Working Table: 1 EA Working Frame – 3 Step Module Storage Cabinet: 2 EA Electric accessories Storage Cabinet: 1 EA Ari Compressor: 1 EA Air compressor (basic equipment minimal machine) Power: AC 220V±10% 50Hz/60Hz Motor power: 650W Max Nominal volume Air compressor: 9L normal output voltage 0.7 MPa, Noise Degree: 66 dB Dimension: L x W x H (CM):173.5 x 70.0 x 166.0 Connection facility: Safety Socket 2mm & 4mm Module: DB1020-MPT01 PLC Brand: SIEMENS Model Number: 6ED1052-1MD00-0BA8 Programming Language: Ladder, Functional Flow Chart Diagram Built in Ethernet communication PLC Power supply: 1 No. PLC Digital Input: 08 PLC Analog Input: 04 Nos PLC Analog Output: 02 Nos PLC Digital output: 04 PLC Display Unit: YES PLC Input Voltage: 24VDC, 1Amp Permissible range, Lower limit (DC): 20.4V Permissible range, Upper limit (DC): 28.8V Programming Software: LOGO Soft Comfort or equivalent Programming Cable: PLC to PC communication Cable Connection facility 2mm & 4mm Safety Socket Module Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT02 PLC Brand: Mitsubishi Model Number: FX3U-16MR-DS Power Supply: 24 VDC Input Types: 24 VDC Output Types: Relay Communication Options: RS-232 • RS-485, RS-422, USB CPU Functions: High speed counters, 32 bit floating point math Program Memory Byte (Step): 128 K max. (64,000) or higher Ambient Temperature: 0-55° C (in operation) -20 ±70° C (in storage) Ambient Humidity: 5-95% RH, no condensation (in operation) Noise Immunity: 1000 Vpp noise voltage, 1 μs pulse width at 30-100Hz Digital Input: 8 Digital Output : 8 (Relay) Programming Software: Gx-Developer or equivalent Programming Cable: SC-09 or equivalent Connection facility 2mm & 4mm Safety Socket Module Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT03 PLC Brand: Fatek Model Number: FBs-14MAR PLC input: 8 points Digital Triggering Power: 24VDC (2 points high speed 100KHz, 2 points medium speed 20KHz, 4 points medium speed total 5KHz) PLC Output: 6 points relay Communication Port: RS232/USB Built-in power supply: SPW14-AC/D12/D24 Connection facility 2mm & 4mm Safety Socket Module Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT04 PLC Brand: Omron Model Number: CPM1A–30CDR–A–V1 Power Supply: 220VAC Triggering Voltage: 24VDC Digital Input: 18 Digital Output: 12(Relay) Programming Cable: PLC to PC communication Cable Connection facility 2mm & 4mm Safety Socket Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT05 PLC Brand: Delta Model Number: dvp10ec00r3 Power Supply: 220VAC Triggering Voltage: 24VDC Digital Input: 06 Digital Output: 04(Relay) Programming Cable: PLC to PC communication Cable Connection facility 2mm & 4mm Safety Socket Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT06 PLC Brand- LS (LS Industrial System) Model number: XBC-DR30SU Power Supply: 220 V AC Digital Input: 18 Digital Output: 12(Relay) Triggering Voltage: 24VDC Programming Cable: PLC to PC communication Cable Connection facility 2mm & 4mm Safety Socket Dimension :LxWxH (cm): 29.5 x 22.5 x 4.5 Module: DB1020-MPT07 PLC Brand: Schneider Electric Model Number: SR3B101BD/ AFPX-C40R Built in display: LCD High-speed Operation Number or control scheme lines Maximum Number of I/O Points: 0…500 with FBD programming 0…240 with ladder programming Discrete input number: 6 conforming to EN/IEC 61131-2 type 1 Output thermal current: 8 A for all 4 outputs (relay output) Mechanical durability: 10000000 cycles (relay output) IP degree of protection: IP20 (terminal block) conforming to IEC 60529 Discrete input current: 4 mA Discrete input voltage: 24 V DC Supply voltage limits: 19.2-30 V Checks: Program memory on each power up Backup time: 10 years at 25 °C Cycle time: 6-90 ms Programming Cable: PLC to PC communication Cable Connection facility 2 & 4 mm Safety Socket Module Dimension: 29.5 x 22.5 x 4.5 (cm) Module: DB1020-MPT08 PLC Brand: Wecon Model Number: LX3V-0806MR-A2 Triggering Voltage: 24VDC Digital Output: 6 (Relay) Digital Input: 8 Power Supply: 220VAC Programming Cable: PLC to PC communication Cable Connection facility 2 & 4 mm Safety Socket Module Dimension: 29.5 x 22.5 x 4.5 (cm) Module: DB1020-MPT09 PLC Brand: Allen Bradley Model Number: Micro820 PLC Digital Input: 12 Nos PLC Digital Output: 07 Nos PLC Analog Input: 04 Nos PLC Analog Output: 01No 20-point controllers Provides embedded 0-10V non-isolated 4 channel analog input and 1 channel analog output for speed control of an AC drive Provides embedded communications via non-isolated serial port (for RS-232 and RS-485 communications) and Ethernet port Communicates via Ethernet/IP™ Provides embedded micro SDTM slot for program transfer, data log, and recipe management Provides embedded support for up to four 10k thermistor temperature inputs Supports program download through USB with an optional 3.5-in. Remote LCD (Optional) Supports up to two Micro800®Plug-in Modules Programming Cable: PLC to PC communication Cable Connection facility 2 & 4 mm Safety Socket Module Dimension: 29.5 x 22.5 x 4.5 (cm) Module: DB1020-MPT10 (Alternative) PLC: Panasonic (Optional) Model Number: AFPX-C40R High-speed Operation Large Capacity Program Memory FP-X, 32k steps*2 program memory Independent Comment Memory Maximum Number of I/O Points Up to eight expansion units can be connected to one control unit, the maximum number of I/O points is 300. the number of I/O points can be increased to 382. Built-in 4-axis Pulse Output Modbus-RTU Power Supply: 220V AC Digital Input: 24 Digital Output: 16 Programming Cable: PLC to PC communication Cable Connection facility 2 & 4 mm Safety Socket Module Dimension: 29.5 x 22.5 x 4.5 (cm) A. PLC Pick & Place Using Pneumatic Air Suction Module Base Plate : Aluminum Profile Structure : Aluminum Profile Function Indicator : Tower Type (Red, Green, Yellow) Carry Function : Using Air suction method Pneumatic cylinder : 02 Pcs Optical Fiber Sensor : 02 Sets Solenoid Valve : 03 Pcs Cabinet control circuit power supply: DC 24V Temperature: -10 ~ 40 ; Humidity: ≤90% ; Air pressure: 0.4 ~ 0.6Mpa Input power : single-phase, three-wire AC 220V±10% 50Hz/60Hz Connection facility 2mm & 4mm Safety Socket Module Dimension: L x W x H (cm): 60.0 x 46.0 x 2.0 B. PLC Pick & Place using Pneumatic Gripper Module Air pressure : 0.4 ~ 0.6Mpa Temperature : -10 ~ 40 ; Humidity: ≤90% ; Cabinet control circuit power supply: DC24V Solenoid Valve : 03 Pcs Optical Fiber Sensor : 02 Sets Pneumatic cylinder : 02 Pcs Carry Function: Using pneumatic gripper method Function Indicator: Tower Type (Red, Green, Yellow) Structure : Aluminum Profile Base Plate : Aluminum Profile Input power : single-phase, three-wire AC 220V±10% 50Hz/60Hz Connection facility 2mm & 4mm Safety Socket Module Dimension: L x W x H (cm): 60.0 x 46.0 x 2.0 C. Water Pump Control Base Plate : Aluminum Profile Water Chamber : Upper And Lower Water through : Solenoid Valve Water Pump : 5W Operating Voltage : 24V PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 D. Fire Indication System Module Smoke Sensor Interfacing PLC and DC power supply Connection facility Interfacing facility with water level control Module Operating Voltage: 24V PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 E. Traffic Light Control Module Built-in ,Green, Yellow, Red Indicator for interface PLC and DC power supply Connection facility Operating Voltage: 24V PLC connection point facility 2mm/4mm Safety Socket Module Dimension :L x W x H (cm): 29.5 x 22.5 x 4.5 F. Pneumatic Control Module Pneumatic cylinder: 03 EA (minimum) Temperature: -10 ~ 40 Humidity: ≤90% Air pressure: 0.4 ~ 0.6Mpa PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 G. Pneumatic solenoid valve Module Pneumatic solenoid valve : 03EA Operating Voltage : 24V PLC connection point : 03EA PLC connection point facility 2mm/4mm Safety Socket Interfacing facility Pneumatic control Module Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 H. Relay Control Module Double pole Double Through Relay : 04 Set Relay Operating Voltage : 24V PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 I. Motor Starter module Magnetic Contact switch: 02 nos Star Delta Status Indication facility Relay Operating Voltage: 220V~240VAC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 J. Input Switch Module Pushbutton Switch: 04 Nos Push on Push Off Switch: 04 Nos Relay Operating Voltage: 24VDC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 K. Sensor module Proximity Sensor : 02 Nos Photo Sensor : 02 Nos Thermocouple : 02 Nos Operating Voltage : 24VDC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 L. Output Indicator Module Output Indicator: 04 Nos Operating Voltage: 220V~240VAC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 M. Variable Frequency Drive Module Variable Frequency Drive: 01 No Input Three Phase/Single Phase Output Three Phase 220 VAC (PWM) Capacity: 400watts Input Operating Voltage: 220V~240VAC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 N. Three Phase Induction motor Module Three Phase Induction Module: 01 No Connection system: Delta Input Operating Voltage: 220V~240VAC PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 O. Stepper Motor Control Module Unipolar Stepper Motor : 01 No Bipolar Stepper Motor : 01 No Input Operating Voltage : 5V/12V PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 P. Seven Segment Display module Seven Segment Display : 02 no Input Operating Voltage : 5V/12V PLC connection point facility 2mm/4mm Safety Socket Module Dimension: L x W x H (cm): 29.5 x 22.5 x 4.5 Q. Power Supply Module Input Operating Voltage: 220V~240 VAC Output AC Voltage: 220V,50 Hz Output DC Voltage: 5V(1Amp),12V(1Amp), 24V(1Amp) PLC connection point facility 2mm/4mm Safety Socket Fuse for Safety protection facility Accessories: Air Compressor : 01 no Connecting jack : 01 Set Power Cable : 01 no PLC to PC Communication cable : 09 Sets English Manual & CD : 01 Set Working Table : 01 Set Computer : Optional